Product Overview
Fuerman's crown protector ring for the Richard Mille RM67-02 replaces the original two-tone rubber gasket at the crown with the same footprint and the same bold look. It sits around the crown and pusher area — the spot a wrist rubs against most often — and takes that wear itself, so the colour accent stays crisp while the case beneath stays untouched.
The part is small and light: around 7 g, with a moderate section that keeps it level with the case instead of standing proud of it. Six two-tone combinations are made, so the ring can either echo the accents already on the watch or set up a deliberate contrast against a black case.
Everything is moulded in fluorine rubber, the compound we also use for the custom fluororubber material watch straps we build for customers who want a band in a colour they cannot find on a shelf. That matters here because the crown area sees sweat, sunscreen, heat and constant friction. The ring has to hold its shape and its colour there — looking right on the first day is the easy part.
Fuerman supplies aftermarket watch parts, and this ring is one of them: it is not made, endorsed or licensed by Richard Mille, and it is a replacement part for the crown position only. Nothing about how the crown winds, sets or works is changed by fitting it.
Crown Fit & Interface
- Moulded to one crown layout — the interface is specific to this reference, so the ring follows the shape of the crown rather than sitting on top of it. A ring made for another case will not seat the same way.
- Hollow centre — the open middle is what slips over the crown position and lets the ring settle tight against the case without adding extra thickness where your wrist rests.
- Textured outer band — a fine beaded, honeycomb-like finish around the outside gives the rubber a subtle grip and softens the small handling marks that a smooth surface picks up.
- It is a part, not a band — unlike a fluororubber material watch strap, this ring never touches the lugs and never changes the line of your strap. It works at the crown and pusher area alone.
- The crown still works as before — the ring sits around the crown, so winding, setting and the pusher action are unchanged.
- What good seating looks like — once it is in place, the ring should sit level with the case with no gap lifting under its edge. If one side stands away, it is not seated properly; lift it out and start again rather than pressing it down.
Material & Build
The ring is moulded in fluorine rubber — the fluoroelastomer usually shortened to FKM. It is the same family of material, and the same compound, that goes into a custom fluororubber material watch strap, and it is chosen for exactly the conditions a crown protector lives in.
Sweat, sunscreen, skin oils, heat and sunlight all attack rubber at the crown. FKM resists them far better than ordinary rubber or silicone: it holds its elasticity, keeps its colour, and does not turn tacky, harden or crack as quickly. That is why the ring feels soft on the first day and still seats the same way a year later.
The section is moderate and the weight is around 7 g, so nothing you notice is added to the wrist. The two colours are built into the construction of the ring rather than applied on top, which is what keeps the contrast between the two halves even. The outside carries a light beaded texture; the inner surface is kept smooth so it sits against the crown cleanly.
Each ring is moulded to the crown dimensions of the reference it is made for, so the fit is precise rather than approximate — the same standard we hold across our small rubber parts, whether you order a watch strap online or a single ring like this one.
Two-Tone Colour Combinations
| Colour combination | Character |
| Red and black | Maximum contrast — the classic motorsport pairing against a black or carbon case. |
| White and red | Cleaner and brighter; the white lifts the ring away from a dark case. |
| Black and yellow | A quieter contrast with a warm accent. |
| Yellow and green | The boldest of the six and the most unusual; suits watches that already carry green or yellow detailing. |
| Red and white | The same high contrast as red and black, but lighter overall and easier against steel. |
| Black and orange | A warm accent that reads well against black cases and black bands. |
Specifications
| Brand | Fuerman |
| Material | Fluorine rubber (FKM) |
| Thickness | Moderate |
| Weight | 7 g |
| Position | Crown protector ring, fitted at the crown area |
| Interface | Special — moulded to this reference's crown layout |
| Fits | The crown position on the watch model this ring is made for |
| Colour options | Six two-tone combinations: red and black, white and red, black and yellow, yellow and green, red and white, black and orange |
Related Bands & Parts
- Luxury crocodile leather strap for Longines watches — a dressier leather band for men's watches compatible with Longines models, for the days the watch wears a suit.
- Silicone quick-release tropical band, 18 mm, 20 mm and 22 mm — a soft, breathable, waterproof sport band for men and women, with quick-release spring bars already fitted.
- Fluororubber material watch strap, 20 mm and 22 mm — a soft, breathable, durable universal replacement band for men and women, in the same FKM family as this ring.
- FKM fluororubber nylon band, 20 mm, 22 mm and 24 mm — a waterproof, breathable replacement strap for men and women with a woven nylon face.
- Custom colour combinations — if none of the six pairings above is what you have in mind, tell us the look you are after. We also build custom fluororubber material watch straps and can talk you through what is possible.
Key supports Confirm Before Ordering
FAQ
Q1. What does this crown protector actually do?
It sits around the crown area and shields it from the friction, sweat and knocks of daily wear, while putting the two-tone colour accent back where the original part had it. Nothing about how the crown winds, sets or operates changes.
Q2. How do I know it will seat properly on my watch?
The ring is moulded for a single crown layout, so a flush fit depends on buying for the right reference. Send us your watch model and a photograph of the case before ordering and we will confirm it — that check costs you a minute and saves a return.
Q3. How is it fitted?
The ring slips over the crown position and settles into the recess. There is no adhesive and nothing is cut. Work over a soft cloth and use your fingers rather than sharp metal tools so nothing touches the case. If you would rather not handle the crown yourself, any watchmaker can fit it in a few minutes.
Q4. Does it keep water out of the case?
It shields the crown area from sweat and everyday moisture as a protective outer part, but it is not a service seal and we do not quote a water-resistance rating for it. If the sealing of the watch itself matters to you — before swimming, for instance — have a watchmaker check the case seals.
Q5. How close will the colour be to the photographs?
The product colour may vary from the picture because of differences in how computer and mobile phone screens display it. If a particular pairing has to match your watch closely, ask us for a photograph of the actual ring before you order.
Q6. How should I look after the ring?
Rinse it in fresh water after heavy sweating or swimming, dry it with a soft cloth, and keep it away from solvents and abrasive polishes. Replace it if it ever feels stiff or shows a crack — the material is meant to stay soft, and a hardened ring no longer seats correctly.
Q7. Can I match the ring to a band in the same colours?
Yes. Bands in the same compound can be ordered in tones that sit well with these pairings, and if you want an exact match rather than a close one, we can put together a custom fluororubber material watch strap for you.
Q8. Is the watch in the photographs included?
No — the watch is for display only and is not included with the ring. If you also want a band, you can shop for a watch strap online from the same store and add it to the same order.
Q9. Can I get a ring like this for a different Richard Mille reference?
This one is moulded for a single crown layout, so it will not transfer to another case. Send us the model you own and we will confirm what is available — the same fluorine rubber goes into the small parts and the custom fluororubber material watch straps we make, so there is usually a route to the look you want.