Product Overview
Fuerman makes this strap for one watch: the Cartier Santos de Cartier medium. It is shaped around that specific case rather than cut as a universal band, so the ends meet the watch the way the original piece does — no step, no gap, no wiggle at the lugs.
The body is FKM fluororubber, the fluoroelastomer that watchmakers reach for when a strap has to survive sweat, sun and salt water without turning brittle. It feels soft and slightly matte against the skin, it does not grab lint the way soft silicone does, and it holds its profile instead of stretching out after a few months of daily wear.
Three kinds of owner tend to buy a strap like this. One is the person whose original leather or steel bracelet has finally given up, and who would rather not pay brand prices for a replacement. Another wants a sportier look on the same watch without buying a second Santos. The third wears the watch every day, works up a sweat, swims in the summer, and wants a band that can be rinsed and put straight back on.
Because this is a custom fluororubber material watch strap built for a single case, the fit at the lugs is the part that matters most, and it is where we spend our time.
Colours on offer are black, navy blue and coffee brown, along with a DIY colour option for something outside that list. If you are buying a watch strap online and would rather be certain before you commit, take a look at the reference on the caseback and measure across the lugs first.
Fit and Case Compatibility
- One case, one fit. This strap is cut for the Cartier Santos de Cartier medium — reference WSSA0010 — and not for the larger Santos case or for any other square-cased model in the range.
- Check the width yourself. Take the current strap off and measure the gap between the lugs, inside face to inside face. A reading of 21 mm tells you this strap is your size; a different figure means you need a different listing.
- Find the reference. The number is stamped on the back of the case. If it matches, you are on the right page. If the engraving is too worn to read, note the case width across the back and the lug gap, and we can work it out from those.
- Wrist fit. The strap follows the same two-piece layout as the original, so if you wear the strap that came with your watch around its middle hole you can expect a similar position on the wrist.
- Very small or very large wrists. If your wrist sits at either end of the usual range, or if the original strap is already on its last hole, mention it when you order and we will go through the measurements with you.
- Keep the parts you take off. Set the original strap and its spring bars aside rather than binning them — a future owner of the watch will want them, and they cost nothing to keep.
Material and Build
FKM — fluoroelastomer, usually written as fluororubber — is the rubber family used for seals and hoses in engine bays and aircraft, where heat, oil, chemicals and time all attack ordinary rubber at once. On a watch strap that translates into something simple: the material shrugs off sweat, salt water, sun and everyday knocks, and it does not go hard and shiny the way natural rubber does after a year or two of wear.
Silicone is the other common choice. It is softer and less expensive, but it tears more readily and it collects dust, hair and lint relentlessly. FKM keeps a cleaner surface and a firmer shape, which is why it looks and wears closer to the band that originally came with the watch than a generic rubber one.
Every custom fluororubber material watch strap in this shape is moulded for its case, and that is where the small details live. The lug ends are formed to the right thickness and curve so they sit against the Santos case rather than standing proud of it, and the sections are finished so the strap feeds through the clasp without catching.
On the wrist the compound warms quickly and stays supple — something you cannot judge when you order a watch strap online. There is none of the stiffness of a new leather strap in its first fortnight, and none of the slipperiness of a loose steel bracelet.
The surface has an even, finely textured matte finish, so it does not flash under office lighting or hold every fingerprint. Nothing is layered on top of the rubber — what you see is the compound itself.
Looked after with a rinse and a wipe, this is a strap that should look much the same after a season as it did on the first day.
Quick-Release System
- Spring bars already fitted. The strap arrives with its quick-release spring bars installed, so there is nothing to thread and no small parts to lose on the carpet.
- Built around the Santos QuickSwitch case. Modern Santos models use Cartier's interchangeable strap system, and the release points on this strap line up with it, so the strap comes off the same way the original one does.
- Nothing sharp near the lugs. A quick-release bar retracts when you push its lever, which means the case never has to be levered at with a spring bar tool. That is the main reason owners who would not normally touch their own watch are comfortable with this one.
- Seconds rather than minutes. One strap off, one strap on, and the watch is back on your wrist — which makes a second colour genuinely useful instead of an ornament in a drawer.
- Easier cleaning. Take the strap off the watch to rinse it after a swim or a hot day, and the case stays dry.
- Useful when you travel. One watch and two straps take up less room than two watches, and the change can be done in a hotel room with no tools at all.
Specifications
| Material | FKM fluororubber (fluoroelastomer) |
| Fit | Cartier Santos de Cartier medium, 35.1 mm case |
| Lug width | 21 mm |
| Width at the clasp end | 19 mm |
| Strap sections | 90 mm and 75 mm |
| Thickness | 3.5 mm |
| Weight | 16 g |
| Attachment | Quick-release spring bars, fitted and ready to use |
| Clasp compatibility | Designed around the original Cartier folding clasp |
| Strap system | Works with the Santos QuickSwitch mechanism |
| Colour options | Black, navy blue, coffee brown, DIY colour |
| Finish | Finely textured matte rubber surface |
| Part type | Aftermarket replacement strap, not a Cartier original part |
Colour Options and Styling
Black is the default for a reason. It disappears against a steel case, it works with a white or silver dial, and it makes the Santos read as a tool watch rather than a dress watch. If you want one strap that covers the office, the weekend and everything between, start here.
Navy blue softens the look and picks up the blue cabochon on the crown, so the watch reads sportier without turning loud. It sits particularly well against a silver or white dial and a bare steel case.
Coffee brown is the warmest of the three. On a two-tone or gold-cased Santos it looks deliberate and a shade dressier than the other options, and it is an easy match for brown leather you already wear.
The DIY colour option is there for anyone who wants custom fluororubber material watch straps in a shade that is not on the standard list. Tell us what you are trying to match when you order — a dial, a car, a team colour — and we will tell you what can be done.
One practical point: the strap is a single solid colour from lug to clasp, so it does not fight with a patterned dial or with the bracelet you might swap back to later. Buying two straps in different colours is common with this fit, because changing them over takes seconds.
Pairing and Related Options
- A nylon band for hot weather. We also list a lightweight fabric band for the same quick-release fit, which suits anyone who wants something even airier than rubber in high summer.
- The hook-and-loop version shown in the gallery. Some of the pictures on this listing show a Velcro-style Santos band with a carbon-fibre-look back buckle. If a hook-and-loop fastening appeals to you more than a folding clasp, ask us and we will confirm what is available in your size.
- A dress strap for another watch. If you also wear a Longines or a similar dress watch, our crocodile leather strap is cut for that style of case and makes a natural second purchase.
- Silicone tropical-style bands. Light, quick-release silicone straps in 18 mm, 20 mm and 22 mm cover most of the other watches in a collection.
- Universal fluororubber and nylon bands. Our fluororubber band in 20 mm and 22 mm and the FKM nylon band in 20/22/24 mm suit a wide spread of watches that do not use a proprietary system.
- A spring bar tool. Handy if you also own watches without quick-release bars. This strap needs no tools at all, but the rest of a collection usually does.
- More than one Santos in the house. If your household or your counter handles several case sizes, we can help you line up custom fluororubber material watch straps for each one.
Customer Reviews
This strap joined the range recently, so there are no customer reviews on it yet. That means the first few buyers are working from the specifications, the photographs and a conversation with us rather than from other people's experience.
If you already own one, a short review is genuinely useful to the next person. The three things buyers ask about most are how the ends sit against the case once fitted, whether the colour in daylight matched what they expected, and how the strap has worn after a few months of daily use.
Reviews appear on this product as they come in. Until then, if there is something the pictures do not show — how thick the strap feels in the hand, how the matte finish looks beside a polished case, whether the blue leans grey or bright — write to us and we will describe the strap rather than let you guess.
Ordering and Confirmation Notes
- Choose your options when you order. The fit and the colour list are shown on this product — black, navy blue, coffee brown or DIY colour. If you pick DIY colour, tell us the shade you are after in the order notes.
- One strap or several. Most buyers start with a single strap and come back for a second colour. If you are ordering for a repair bench, a shop or a household with more than one Santos, give us the quantities and references and we will confirm what can be supplied. For larger runs we can also line up custom fluororubber material watch straps across several case sizes.
- Lead time and delivery. Ask us for the current lead time and delivery options before you plan around a date — we confirm both for each order rather than printing a blanket figure.
- Packing. Orders are packed to protect the strap in transit. If you need it presented a particular way for a shop counter or as a gift, say so and we will confirm what is possible.
- Seeing a colour first. If you are ordering a custom fluororubber material watch strap and want to check the shade in daylight before committing, ask about sample availability.
- Cheaper than a return. If the reference, the width or the clasp is not completely clear, write to us with what you can read on the watch. A few minutes of checking beforehand is worth far more than sending the wrong fit back.
Original Clasp Reuse
- Your original clasp carries over. This strap is made around the Cartier folding clasp that is already on the watch, so the closure moves across from the old band rather than being bought a second time. The finish, the logo and the press-to-open action stay exactly as they are, which is what keeps the watch looking untouched.
- 19 mm where the clasp sits. The band measures 21 mm between the lugs and narrows to 19 mm at the clasp end — the width the medium Santos folding clasp closes onto — so the closure lines up with the band instead of pinching it or overhanging it.
- What arrives, and what does not. You receive the strap with its quick-release spring bars already fitted. No new buckle is included, because the original clasp and its own fittings are what the strap is shaped to take.
- Fitting a second colour means moving the clasp. The closure travels with the strap, so a colour change adds a minute or two while you release the clasp and clip it onto the new band. That is still work you can do at a desk, and it is why a second fluororubber material watch strap costs you a strap rather than a whole new assembly.
- The clasp is the part that ages first. On a folding clasp it is the hinge and the spring that wear, not the band, so a strap change is the natural moment to open and close the clasp a few times, feel for slack, and look closely at the hinge.
- Kit for the swap. Work over a soft cloth at a table and keep the clasp's own pin or spring bar in view while it is off the band — it is the smallest piece in the job and the easiest one to lose.
- Worn, damaged or missing. If the hinge has gone loose, if a spring bar has snapped, or if the clasp went astray with the old strap, tell us what happened when you order and we will confirm what can be supplied alongside the strap.
Technical Support & Model Matching
FUERMAN has been supplying watch parts and accessories from Huadu District, Guangzhou since 2010 — 15+ years in the trade, a 60-strong team and a deep ready stock held in China. Our technical team, which includes technicians with 30+ years of watchmaking experience, matches items to your watch by brand, model or reference number before you order, so you know it will fit. Send a photo or a measurement if you are unsure: we will confirm the right choice, talk you through fitting, and stay with you afterwards — troubleshooting, replacement parts and after-sales help long after your order arrives.
FAQ
Q1. Can I change the strap myself without risking the watch?
Yes — this is one of the easier swaps you can do on a watch. The quick-release bars retract when you push their levers, so nothing sharp goes anywhere near the lugs. Work over a soft cloth on a table, keep a thumb over the lug while you release each side, and check that both ends sit flush before you put the watch back on. If it still feels like something you would rather not do, any watchmaker will make the change in a couple of minutes.
Q2. How should I clean the strap?
Warm water with a drop of mild hand soap is enough. Work it over the surface with your fingers, rinse well, then pat dry with a soft cloth and let it air dry away from direct heat. Take the strap off the watch first if you want to clean the area behind the lugs. Avoid alcohol, acetone and abrasive household cleaners — they dry the surface out and dull the matte finish over time.
Q3. Can I swim and work out in it?
The rubber itself is untroubled by water. A fluororubber material watch strap handles sweat, pool chlorine and seawater without swelling, cracking or taking on a smell, and a rinse afterwards is all it asks. One thing worth being clear about: changing a strap does not change the water resistance of the watch itself. That comes from the case, the crown and the seals, so keep treating the watch according to the rating it already has.
Q4. Will the colour look like the photos?
Screens are the variable, not the strap. Black, navy blue and coffee brown are solid compound colours with a matte surface, so they read differently under office light than in daylight, and every phone renders them a little differently. When you buy a watch strap online, expect the shade to sit within a close range of the picture rather than being pixel-identical. If you are matching a dial exactly, tell us which one and we will describe the closest option.
Q5. Is this a Cartier strap?
No — and we would rather say so plainly. This is an aftermarket replacement strap made by Fuerman, not an original Cartier part, and it is not connected with or endorsed by Cartier. What it is built to do is match the fitting of the Santos medium case, take your existing clasp, and give you a durable rubber strap that sits the way the original one does.
Q6. How long will the strap last?
Wear depends on how often you wear it, how much sun it sees and how it is stored, so we would rather describe the material than quote a number. FKM is chosen because it resists the things that finish off low-quality rubber — heat, UV, sweat, salt and chemicals — and it does not go hard or chalky with age. Rinse it after heavy use, keep it out of long spells of direct sun when stored, and it should stay comfortable and presentable for a long time.
Q7. Does the strap come with a new buckle?
The strap is designed around the Cartier folding clasp already on your watch, so you move your clasp across when you change over. That keeps the look consistent and saves buying a part you already own. If your clasp has been lost or damaged and you need a complete strap-and-clasp set, tell us and we will confirm what is available.