Product Overview
The Blancpain Fifty Fathoms 5000 and 5015 share the same strap gap, and this fluororubber material watch strap is built for it - two pieces, molded ends, FKM rubber through the body rather than fabric. It is the band you fit when the original sailcloth strap has stiffened, frayed or started to hold water, and you want the watch back on the wrist without giving up the look it was designed around.
Anyone who wears a Fifty Fathoms regularly collects the same short list of complaints about the stock band: it stiffens with age, stays damp long after a swim, and looks tired well before the watch does. This strap answers each of those with a different material rather than a different style. The outer face is molded with a fine embossed weave that reads as sailcloth from arm's length; underneath it is modern fluororubber, which stays supple, shrugs off salt water and sweat, and asks nothing of you afterwards.
It covers the whole week in practice. As an everyday band on a desk-to-dinner watch the texture keeps it looking purposeful instead of gym-bright; on a dive trip or a pool holiday the only attention it needs is a rinse in fresh water; and in a hot, humid summer it does what fabric and leather both fail at. Owners who keep one good watch for travel tend to leave this strap fitted year round and pull the steel bracelet out for formal evenings. It is also the straightforward fix for a Fifty Fathoms sitting in a drawer because its original band gave up - the strap restores the silhouette, and the material removes the reason the old one failed.
Fit & Case Matching
- One measurement decides everything. The strap gap on the Fifty Fathoms 5000 and 5015 is 23 mm - the distance between the inside faces of the two lugs. This fluororubber material watch strap is cut to that figure, and it is a size most general ranges simply do not carry.
- How to check yours in a minute. Measure across the gap with a ruler, or read the width printed on the underside of the band you are taking off. If the watch is already on its second or third strap, trust the case measurement rather than the printing on the old one.
- Curved ends molded for this case. The Fifty Fathoms case narrows and falls away at the lugs, so a straight-ended band leaves a step and a dark line under each one. These ends follow the case shoulder, so the strap meets the watch cleanly instead of sitting proud of it.
- What the flush join gives you. A band that lies flat against the case has far less room to rock, so the spring bars stay settled and the lug edges are not worked at week after week.
- The measurement that decides every watch strap online purchase. A band that does not fit was usually ordered a millimetre out, and on a case shaped like this one there is no slack to absorb the difference.
- Landing between two sizes. If your measurement falls between whole millimetres, go by the inside edge of the lugs rather than the outside width of the case.
- If your case measures differently. A different reference needs a different band, and this one cannot be trimmed down to suit a narrower case.
Colors & Finish Options
| Color or finish | What it suits |
| Black | The classic tool-watch pairing; it recedes against a dark dial and works with any bezel insert |
| Brown | A warmer, vintage-leaning shade that sits well with a steel case and aged lume |
| Dark blue | Picks up a blue dial or bezel without trying to match it exactly |
| Maroon | A deep red-brown that adds deliberate contrast to a black dial |
| Grey | The quiet option; closest in tone to a brushed or sunburst finish |
| Matte woven texture | The same embossed sailcloth-style surface on every colour, glossy nowhere |
| Silver-tone buckle | Choose this when you want fresh hardware with the band |
| Black buckle | Matches blacked-out or darker case hardware |
| No buckle | Choose this if you are keeping the clasp that came with the watch |
Material, Texture & Build
Specifications
| Property | Detail |
|---|
| Material | FKM fluororubber (fluoroelastomer) |
| Outer surface | Embossed nylon / sailcloth-style texture, matte finish |
| End shape | Curved, molded for the Fifty Fathoms 5000 case |
| Lug width | 23 mm |
| Length | 120 mm + 75 mm (two pieces) |
| Thickness | 2.3 mm |
| Weight | 16 g |
| Buckle | Not included - fits the original Blancpain pin buckle or folding clasp |
| Fits | Blancpain Fifty Fathoms 5000 and 5015 |
| Supplied | Replacement strap only; the watch shown in the photographs is for reference and is not included |
Other Straps in the Range
Buckle & Length Fit
- No buckle is packed with the band, and that is deliberate: the clasp already on your Fifty Fathoms was made for this case and moves straight onto the new strap, so what sits on the wrist stays exactly as it is today.
- Both types of clasp work. Whichever one your watch is wearing now, the band is shaped to accept it, so keeping your own has never been the compromise.
- The two halves measure 120 mm and 75 mm. The longer half carries the adjustment holes and the shorter half carries the clasp, so your clasp sits on the same side of the watch it does now.
- Length is set by the clasp and the holes, not by trimming. The ends of a fluororubber material watch strap are molded, so the band cannot be shortened with a knife; you adjust the fit by moving the pin or the clasp tongue from one hole to the next.
- A folding clasp takes up more band length than a pin buckle, so the same strap can sit differently depending on which one you are keeping. If your current band is on the first or the last hole, tell us which clasp you use and your wrist measurement in millimetres, and we will check the length before the strap leaves us.
- Measure the wrist, not the band you are taking off. Wrap a tape or a strip of paper around the wrist where the watch sits, snug but not tight, and read the figure in millimetres; a strap lying flat on a table measures out longer than it sits on the arm.
- If the fit feels close but not quite right, the answer is usually a different hole rather than a different strap. With your own clasp in place this band covers the usual range of adult wrists, from a snug wearer to someone who likes the watch to sit loose.
- If the original clasp is no longer with the watch, say so when you order. We can send the band set up for a new buckle instead and confirm which buckle suits the case.
Aftermarket Part Notice
Technical Support & Model Matching
FUERMAN has been supplying watch parts and accessories from Huadu District, Guangzhou since 2010 — 15+ years in the trade, a 60-strong team and a deep ready stock held in China. Our technical team, which includes technicians with 30+ years of watchmaking experience, matches items to your watch by brand, model or reference number before you order, so you know it will fit. Send a photo or a measurement if you are unsure: we will confirm the right choice, talk you through fitting, and stay with you afterwards — troubleshooting, replacement parts and after-sales help long after your order arrives.
FAQ
Q1. Will this strap fit the Fifty Fathoms 5015 as well as the 5000?
Both. The 5000 and 5015 share the same strap gap and the same case shoulder shape, so one band covers the pair. If your watch is a different Fifty Fathoms reference, measure across the lugs before ordering: if the gap matches, the strap will seat properly, and if it does not, you need another version.
Q2. Does the strap come with a buckle, and can I keep the original one?
There is no buckle in the box by default: the band is cut and shaped around the hardware already on your watch, which is how the Fifty Fathoms keeps its own look on the wrist. If you would rather fit a new one, the same strap is offered with a silver-tone buckle or a black buckle, or with no buckle at all if you already have one.
Q3. Is this a genuine Blancpain strap?
No. It is an aftermarket replacement part made by Fuerman, and it is not produced by or affiliated with Blancpain. What it does reproduce is the geometry - the curved ends and the lug gap follow the same measurements as the original - so it fits the case and works with the original clasp. Keep the band that came with the watch if you ever want the watch exactly as it left the shelf.
Q4. If my current strap fits on the middle hole, will this one sit the same way?
The two pieces follow the usual layout for this case and the original clasp goes back on, so the adjustment points stay familiar. If your band is currently on the very first or the very last hole, mention your wrist measurement when ordering and we will confirm the length suits you before it ships.
Q5. Could I fit this strap to a different watch?
Only where the other watch has the same lug gap and a case shoulder that suits a curved end. The ends are shaped for the Fifty Fathoms case, so on another watch the band may locate in the lugs without lying flush against the case - which is the detail that gives this strap its finished look. For other models we build custom fluororubber material watch straps for specific references and also list universal fluoroelastomer bands in several widths.