Home > All Products > Material Classification > Fluororubber Material > Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
1/1
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02

Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02

SKU:
Product Name: Fuerman
Material: Fluorine Rubber
Thickness: Moderate
Weight: 8g
Optional Colors: White / Azure Blue / Orange / Pink / Azure Blue / Black / Red / Yellow / Grey / Green / Dark Green / Light Blue / Dark Blue / Purple / Brown
Standard Interface
The product color may vary from the picture due to the display differences of computer/mobile phone screens.
0.0 (0 Reviews)
0 Sold
$43.36 $21.68
Received successfully
Coupon Code
CONTINUE SHOPPING
    Please select the information you want X
  • Size:
    0mm
  • Color:
    White
    White
    Royal Blue
    Royal Blue
    Orange
    Orange
    Pink
    Pink
    Dusty Blue
    Dusty Blue
    Black
    Black
    Red
    Red
    Yellow
    Yellow
    Gray
    Gray
    Green
    Green
    Light Blue
    Light Blue
    Navy Blue
    Navy Blue
    Purple
    Purple
    Brown
    Brown
    Dark Green
    Dark Green
    Please select the information you wantX
Quantity:
-
+
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
1/1
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Fluororubber Seal Ring for Richard Mille RM030/RM35-01/RM35-02
  • Description

Seal Ring Overview

Every Richard Mille tonneau case has a small rubber ring sitting between the movement and the outside world — one at the crown, one at the caseback. This is that ring: a precision-cut fluororubber seal with a standard fit, made to drop into the existing groove on the references it covers. It is the part that meets skin, sweat and water first, which is why it is usually the first thing to age, and replacing it is one of the least expensive ways to keep a watch feeling tight and clean.

Owners come to it for two different reasons. The first is upkeep — the original seal has gone hard or flat, the caseback has just been opened for a service, or the watch is heading for the water and the old ring is no longer something to trust. The second is colour. The ring is visible in the gap around the crown, so a coloured one gives the case a deliberate accent: black and grey stay quiet, while red, orange and azure blue make the watch look bolder. If your case has the coloured fibres of a quartz-TPT or carbon-TPT build, a brighter shade makes that weave look like part of the design rather than an accident. Owners who already wear a custom fluororubber material watch strap often choose the seal to sit in the same colour family as the rubber on their wrist.

It is supplied as the seal ring on its own, as an aftermarket replacement part rather than a genuine Richard Mille component. Fitting takes minutes and no special tool, and if you would rather not open the watch yourself, any watchmaker can fit it for you.

Specifications

SpecificationDetail
MaterialFKM fluororubber (fluoroelastomer)
Compatible withRichard Mille RM030 (42.70 × 50.00 mm case), RM35-01 and RM35-02 (44.5 × 49.94 mm case)
Fitted atCrown and caseback sealing grooves
ProfileO-ring cross-section with a toothed outer edge
ThicknessModerate
Weight8 g
FinishMatte, smooth to the touch
InterfaceStandard fit into the existing groove
FittingNo special tools required
Heat resistanceHolds its shape up to 200 °C
SealingFull moisture seal at the crown and caseback once correctly seated
Supplied asOne replacement seal ring

Material & Build

  • FKM rather than ordinary rubber. The ring is moulded from fluororubber (fluoroelastomer), the material family used for seals that have to survive heat, fuel and weather. Nitrile and plain rubber seals harden and glaze as they age, while this one is chosen for staying supple.
  • Heat and sunlight. It keeps its structural integrity up to 200 °C and does not degrade under UV, which matters for a watch left on a windowsill or worn through a long, hot summer.
  • Sweat, salt and chemicals. Perspiration, sunscreen, sea water and everyday cleaning products are what attack a seal in normal use, and FKM stands up to all of them better than silicone or standard rubber.
  • A surface that stays where you put it. The matte finish and the toothed outer edge give the ring a little grip inside the groove, so it seats evenly instead of creeping once the case is closed.
  • Supple enough to fit by hand. The ring flexes easily over the crown and springs back to shape — no heating, no stretching tools, and no risk of creasing it permanently while you work.
  • Colour moulded in, not painted on. Each shade runs right through the material, so the ring does not flake or lose its finish where it flexes.
  • The same material family as the straps. The FKM behind these seals is the same class of rubber used for our custom fluororubber material watch straps, so the ring and the strap on your wrist age at a similar rate and hold their colour the same way.

Fitting & Installation

  1. Decide which position you are replacing. The crown seal and the caseback seal are separate parts, so work out whether you are doing one or both before you order.
  2. Take the strap off first if you are also changing it. A fluororubber material watch strap comes away in seconds and leaves the watch head flat on the bench, which makes the crown and caseback far easier to reach.
  3. Clear a soft, well-lit surface. A lint-free cloth over a shallow tray stops the ring disappearing if it slips, and a bright lamp lets you see whether the new seal sits level.
  4. Lift the old seal out with a plastic-tipped tool. Work around the circle rather than levering at one spot, and note how the ring sat before it comes away.
  5. Clean the groove before fitting anything. Wipe out residue, grit and dried lubricant with a soft cloth; a seal pressed over debris will never sit flat.
  6. Seat the new ring evenly. Press it in with your fingers, working around the circle so there is no twist and no trapped fold, until the matte surface sits level with the groove edge.
  7. Check it under a light before you close up. If any part of the ring stands proud, lift it out and start again rather than assembling the case over it.
  8. Have the case pressure-tested. This is the step that confirms the watch is watertight again, and it is the one worth handing to a watchmaker if you are not set up for it.
  9. Stop if it will not sit flush. That usually means the groove differs from the ring you have, so send us a photo and a measurement and we will point you to the right one.

Colour Selection

ShadeCharacter
BlackThe safest choice — it disappears into a dark case and never competes with the watch
WhiteCrisp and high-contrast, almost like a thin highlight line at the crown
GreyUnderstated, close in tone to titanium and carbon finishes
RedThe boldest accent in the range; the shade that turned into a signature detail on these watches
OrangeWarm and sporty, and it reads well against a black composite case
YellowBright and unexpected; ideal on a case that already carries yellow detailing
Green and dark greenMuted and modern — dark green is the quieter, near-black option when you want the shape without the colour
Light blue and dusty blueLight, easy summer shades that stay subtle in daylight
Azure blueStrong, saturated contrast against a dark case
Dark blueDeep and dressy, close to the tone of a dark blue strap edge
PurpleFor a deliberately colourful build — unusual, and eye-catching from across a room
PinkA soft accent that reads as a pastel detail rather than a statement
BrownWarm and low-key; sits naturally with rose gold or with leather

Care & Replacement Timing

  • Replace it when it stops behaving like rubber. A seal that has gone hard, shiny, flattened or noticeably dull in colour has lost the elasticity that does the actual sealing.
  • A service is the natural moment to do it. Any time the caseback comes off, the crown and caseback seals should be checked in the same visit rather than left for later.
  • Fit a fresh ring before water use, not after. If the watch is heading for the pool, the sea or a dive trip, that is the moment to change the seal and have the case tested.
  • Rinse with fresh water after salt water. Salt left sitting in the groove starts the next round of hardening, and a quick rinse followed by a dry with a soft cloth is all it takes.
  • Keep cleaning gentle. Warm water and a soft cloth are fine. Alcohol, acetone and aggressive solvents will attack any rubber seal, whatever grade it is.
  • Store spares out of the sun. Keep them in a small bag away from sharp tools and direct sunlight and they will stay supple until you need one.
  • Treat the strap the same way. The same rinse-and-dry routine keeps a fluororubber material watch strap looking new, because rubber on the wrist and rubber in the case age under the same conditions.
  • Do not re-use a stretched seal. Once a ring has been levered out and distorted it will not seal reliably again, so fit a new one instead.

Pairing & Related Items

A coloured seal is the smallest change you can make to one of these watches, and it works especially well when something else answers it. The obvious partner is the strap: our custom fluororubber material watch straps come in the same family of shades, so a red ring above a red rubber strap reads as one deliberate scheme rather than two separate choices. If you prefer contrast, keep the rubber black and let the ring carry the colour on its own.

The rest of the range is worth a look if you are refreshing more than the seal. There is a fluororubber watch strap in 20 mm and 22 mm for owners who want solid rubber on the wrist, an FKM fluororubber nylon watch band in 20, 22 and 24 mm when breathability matters more, quick-release tropical-style silicone bands in 18, 20 and 22 mm for hot-weather wear, and a crocodile leather strap for dressing a watch up rather than down. Owners who travel with two watches often take a second seal in a different shade at the same time, so the look can change without placing another order.

If you are shopping for a watch strap online to go with this watch, keep the colour family in mind. A ring and a strap chosen together look intentional, while a bright seal against an unrelated strap colour tends to look accidental.

Ordering & Confirmation

  1. Confirm the position and the quantity. Crown seal, caseback seal or both — they are separate parts, so tell us how many of each you need.
  2. Check your watch against the references this ring is cut for. If you are not certain which one you have, tell us the model you own and we will confirm before you order.
  3. Choose your shade. Strong colours look very different in daylight than on a screen, so it is worth looking through buyer photos under Customer Reviews before settling on red, orange or blue.
  4. Ask about a custom fluororubber material watch strap at the same time if you want the seal and the strap to match. Ordering them together keeps the colours consistent.
  5. Confirm current lead time, shipping method and payment terms with your sales contact before you commit. These vary by destination and by order size, and it is better to have the details in front of you first.
  6. Combine the order if you are buying a watch strap online at the same time — seals are small and travel safely in the same shipment.
  7. Say so if you need a colour in quantity, or if you are ordering for a workshop or a retailer rather than for a single watch.
  8. Keep the packing until the ring is fitted. It is a small part in a small bag, and a spare kept with your watch tools saves a second order later.

Water Resistance & Sealing

A seal ring is only one part of what keeps water out. On the RM030, RM35-01 and RM35-02 the ring sits in the crown and caseback grooves, and its job is to close the joint between two machined surfaces that would not otherwise meet tightly. Seated correctly, it gives IP67-level sealing at those two points — a figure that applies to the seal and the joint it closes, not to your watch as a whole.

That distinction matters after a change. A ring that has gone hard, flattened or lost its elasticity has stopped pressing against the groove walls, so fitting a fresh FKM ring restores the compression that joint was designed around. The rest of the case still has to be right: the caseback needs to go back on and be tightened to its intended torque rather than simply hand-tight, the crystal and crown gaskets are separate seals that age on their own schedule, and a case that has taken a knock can be out of true even with a new ring in place. Swapping this ring is not the same as re-certifying the watch.

The only reliable way to know where you stand is a pressure test, and that is a job for a watchmaker with the right equipment — dry or wet testing, done after the ring is fitted and the case is closed, and before the watch goes near a pool, the sea or a dive trip. If a test fails, the seal is rarely the only culprit, so ask for the crystal, crown and caseback joints to be looked at in the same visit.

Two things worth knowing. Changing your band makes no difference either way: a fluororubber material watch strap, a nylon or leather band, or a steel bracelet all sit outside the case, so a strap swap will not affect how the ring seals. And a fresh ring does not raise the watch's original water-resistance rating — that rating is set by the case design, not by the part inside it. Fit the ring, have the case checked, then use the watch as you always have.

Technical Support & Model Matching

FUERMAN has been supplying watch parts and accessories from Huadu District, Guangzhou since 2010 — 15+ years in the trade, a 60-strong team and a deep ready stock held in China. Our technical team, which includes technicians with 30+ years of watchmaking experience, matches items to your watch by brand, model or reference number before you order, so you know it will fit. Send a photo or a measurement if you are unsure: we will confirm the right choice, talk you through fitting, and stay with you afterwards — troubleshooting, replacement parts and after-sales help long after your order arrives.

FAQ

Q1. Does one ring fit both the crown and the caseback?

The same ring profile is used at both positions on the RM030, RM35-01 and RM35-02, but the crown and the caseback take separate seals. Tell us which one you are replacing, or order both if you are doing a full refresh. If the groove at either end measures differently from what you expect, send us a photo before you order.

Q2. How does FKM compare with the ordinary rubber seal that came out of my watch?

FKM fluororubber is the more stable of the two. Standard rubber and nitrile seals tend to harden and glaze with age, which is exactly when they stop sealing properly, while FKM keeps its elasticity for longer and resists heat, sweat, salt water and UV without cracking. In practice it means a ring that still feels soft rather than brittle when you come to change it. The custom fluororubber material watch straps we supply are made from the same class of material, so the feel will be familiar.

Q3. Will the colour look the same as it does in the photographs?

The shades are moulded into the rubber, so what you see is the material itself rather than a coating that can wear off. How bright a colour appears still depends on the screen you are viewing it on — a red ring can look warmer on a phone than it does in daylight. If you are choosing between two strong shades, ask us to describe the tone, or check buyer photos before you decide.

Q4. Can I fit it myself, or does it need a watchmaker?

Most owners can fit a crown or caseback seal without special tools, as it is a matter of lifting the old ring out and pressing the new one into the groove evenly. The one step worth handing over is the pressure test after a caseback seal goes in, because that is what confirms the watch is watertight. If you are also fitting a custom fluororubber material watch strap, do that first — with the strap off, the watch head sits flat and the seal is much easier to reach.

Q5. Does the ring change how the crown feels?

No. The seal sits in the groove behind the visible edge, so the crown still turns, pulls and pushes with the same resistance as before. For the first few days a fresh ring may feel slightly firmer than the perished one it replaced, and that is elasticity returning rather than extra friction.

Q6. Do you supply the matching strap as well as the seal?

Yes. The range covers fluororubber, nylon, silicone and leather bands in the widths these watches use, so you can order a watch strap online at the same time as the ring and keep the colours consistent. Tell us which shade you have chosen for the seal and we will point you to the closest match.

Q7. Can I swim with a new seal fitted?

The ring is what seals the crown and the caseback against moisture, but a seal on its own does not make a watch water-resistant — the case has to be closed correctly and pressure-tested afterwards. Fit the ring, have the case checked, then treat the watch as you always have. The same logic applies to what you wear it on: a fluororubber material watch strap is the sensible pairing for regular swimming, which is why we make both.

Frequently Bought Together
more
Frequently Bought Together

CUSTOMER REVIEWS

0.0 0 Reviews
Write a review