Product Overview
This strap is built around one watch: the IWC Pilot's Watch Mark XVIII Le Petit Prince. The ends are cut for that case, the spring bars are built into the strap instead of sitting loose in a bag, and the band is light enough that the watch sits on the wrist the way it did on its original leather. It is a quick release watch band in the literal sense: press the lever, the bar retracts, and the strap comes away without a tool.
The material is FKM, a fluororubber chosen for heat, sweat and sunlight rather than the silicone used on cheaper straps. It keeps its matte finish and colour through daily wear.
Three things usually bring people to it. The original leather has creased and darkened at the buckle, and the watch needs a weatherproof second life without losing its character. Or the watch came on rubber, that rubber has gone hard and shiny, and this is the like-for-like replacement that still matches the dial. Or nothing is wrong at all and you simply want to wear a blue-dial pilot's watch through a wet summer without thinking about it — in which case the blue version of this fluororubber material watch strap is the obvious pick.
Ordering a watch strap online usually comes down to two numbers and one choice: the gap between the lugs, the length you need at the buckle end, and whether you keep your IWC clasp or take a buckle with the strap. All three are covered here, and the swap itself takes about as long as reading them.

Fluororubber Material & Upkeep
- A fluororubber material watch strap, not silicone. FKM is denser and far more resistant to heat, UV, sweat and the oils in sunscreen and skin. It does not go tacky in summer or chalky at the edges the way inexpensive silicone does.
- Water and sweat. Rain, sweat and a swim do nothing to the strap itself; whether the watch goes in the pool is a question about its case and seals.
- The surface. Matte, with a subtle embossed pattern that hides fingerprints and small marks and keeps the band from looking glossy against a brushed steel case.
- Weight and profile. Light enough to sit flat under a shirt cuff, thin enough that a pilot's watch does not tip forward on the wrist.
- Rinse it now and then. Lukewarm water with a drop of mild soap, a soft brush through the holes and along the underside, then rinse and pat dry. Let it air dry away from a radiator or direct sun.
- Store it flat. Keep the strap loosely coiled or laid out rather than folded under a watch box lid; FKM will hold a crease if it is pressed for months.
- Watch the bars. This quick release watch band relies on two small levers — the only moving parts. If one feels stiff or does not spring back, replace the bar before it lets go at an inconvenient moment.
- Other widths and colours. Builds outside the standard list are made as custom fluororubber material watch straps using the same compound, so the feel and finish stay consistent.

Fitting & Lug Width
- Start with the reference. The 40 mm Mark XVIII Le Petit Prince — IW327004, IW327010 and IW327016 among them — takes a 20 mm strap. The reference is engraved on the case back, so the check takes a second.
- Measure the gap, not the case. With the watch face down, measure between the two lugs where the strap sits. That distance in millimetres is the width you order; a ruler is enough and a basic caliper is better.
- Order the width your watch measures. The strap is made in several widths for IWC pilot cases, so use the measurement rather than the model name.
- Close measurements. 20.3 mm is a 20 mm strap. If you land on something like 20.6 mm, measure again in a second place before deciding: a strap a millimetre too wide will not seat, and one that is too narrow will shift against the lugs.
- Length. The buckle side and tail are sized for most wrists; the exact measurements are in the specifications. If you normally wear the last hole of a standard strap, say so when you order and we will check the length against your wrist measurement first.
- Width is the whole game. When you order a watch strap online, it is the one measurement that decides whether the strap fits, and checking it takes less time than reading about it.
- A width that is not listed. Cases outside the listed widths are not covered by this strap; ask us about a custom fluororubber material watch strap.

Quick Release & EasX-CHANGE
- Lay the watch face down on a soft cloth, caseback up, and set the new strap beside it. A folded towel is enough; the point is that nothing hard is under the crystal.
- Release the old strap. Slide the small lever on the spring bar towards the centre of the strap and the bar retracts, so the strap lifts out of the lugs. On an IWC case with the EasX-CHANGE release, the same thing happens from the case side: press, and the strap comes free.
- Hook one end in first. Angle the strap so one tip of the spring bar enters its lug hole, then let the strap hang while you deal with the other side.
- Press the lever, drop the second tip into the opposite hole and release. The bar springs out and locks into place.
- Tug the strap gently away from the case. If both tips are seated it will not move; if it shifts, one tip is resting on the lug instead of in the hole and needs to come out and go again.
- Repeat at the other end, then close your clasp or fit your buckle. Each side takes seconds, needs no spring bar tool, and leaves the lugs unmarked — which is the part most people worry about when they order a watch strap online.

Colour & Dial Match
The Petit Prince dial is a deep, slightly sunburst blue, and the blue strap is the version most owners choose for it: the two sit in the same colour family, so the watch reads as one object rather than a watch with a band bolted on. Under indoor light the matte rubber reads a shade deeper than the dial because it reflects less; in daylight they come closer together. If you want the nearest match to the dial, blue is it. Black is the safe one. It picks up the black printing on the dial and the steel of the case, hides scuffs and creases better than the other two, and works with a suit or a t-shirt without a second thought. Dark green is the quiet choice — less expected than black, still restrained enough for an office, and a good match for olive, khaki and earth-toned clothing. On a steel pilot's watch it reads as deliberate without shouting. Two honest notes. The rubber is matte, so the colour shifts under different lighting, and screens vary as well; treat the photos as a guide rather than a swatch, and ask about custom fluororubber material watch straps if you need a colour outside these three.

Specifications
| Specification | Detail |
|---|
| Product name | WG-FJ39 |
| Material | Fluorine rubber (FKM) |
| Lug width | 20 mm / 21 mm / 22 mm |
| Length | 125 mm + 65 mm |
| Thickness | 2.7 mm |
| Weight | 15 g |
| Colours | Black, blue, dark green |
| Fitting | Strap only, steel buckle, or black buckle |
| Clasp type | Traditional pin buckle or folding clasp, depending on the version |
| Attachment | Built-in quick-release spring bars |
| Fits | IWC Pilot's Watch Mark XVIII Le Petit Prince, 40 mm case |

Ordering & Custom Enquiry
- Confirm the width. Measure the gap between the lugs and order that measurement. If it sits between two sizes, ask before you pay.
- Choose the colour. Black, blue or dark green; blue is the one that follows the Petit Prince dial.
- Choose the fitting. Strap only if you are keeping your IWC folding clasp, or with a steel or black buckle if you want the complete assembly. Whichever you pick, the strap underneath is the same.
- Tell us what it is going on. If you are unsure of the case reference, send the number from the case back and we will check the width before the strap is packed.
- Ask for something outside the list. A different colour or width is quoted as a custom fluororubber material watch strap; colours, buckle fittings and logo work are priced individually.
- Confirm the commercial details with your sales contact rather than assuming them at checkout — current stock, price, shipping cost, packing and any import duty for your country are confirmed on your order, along with the delivery time to your address.

Warranty & After-Sales
Every order is checked before it leaves us, and our support does not stop at delivery. Email our after-sales team and a named contact replies with clear next steps. If an item arrives damaged, faulty or different from what you ordered, we arrange a replacement or the right parts. Need help fitting or using your purchase? We will walk you through it remotely, step by step, and keep replacement parts available afterwards. FUERMAN has served customers worldwide since 2010 with a team of 60+, and we stay reachable long after the order.

FAQ
Will this strap fit the 40 mm Mark XVIII Le Petit Prince?
Yes. That case takes the width shown in the specifications, and this strap comes with the bars already fitted. If your watch is a wider IWC pilot model, measure the gap between the lugs first — a strap of the wrong width will not seat. For anything outside the listed widths, ask about a custom fluororubber material watch strap.
Can I keep my original IWC folding clasp?
Order the strap-only version. It arrives as a quick release watch band with the bars fitted and no buckle, so your existing IWC clasp drops straight on. If you would rather have a complete strap out of the box, the steel and black buckle versions are the same rubber with the hardware included.
Can I swim or train in it?
The strap handles water, sweat and sun without swelling, cracking or going tacky, and it wipes clean afterwards. Whether the watch goes in the pool is a question about the case, its seals and its service history, not about the strap. Rinse in fresh water after salt water or heavy sweating and let it dry before it goes back in the box.
Will a 20 mm version fit another brand's watch?
Physically, yes — 20 mm is 20 mm, and the quick-release bars fit any case drilled for them. What changes is the look: this strap is shaped for the proportions of a pilot's watch, so on a slim dress watch it will read chunky. Measure the lug gap before you order and it will fit; whether it suits the watch is the part only you can judge.
Can I order custom fluororubber material watch straps in another colour or width?
Yes. If black, blue and dark green do not cover what you need, other colours, widths and buckle fittings can be quoted, including logo work on the strap. Send the width, the colour reference and where the straps are going, and the team will confirm what can be made.






