Product Overview
An Avenger, a Superocean and a Navitimer have little in common on the wrist, but they share the same replacement problem: the original rubber strap hardens, fades or cracks, and a genuine replacement is either hard to find or priced like a service part. This custom fluororubber material watch strap was developed to solve that across all three collections at once — a flat-mouth cut, a matte surface and a taper that keeps the underside of the wrist neat.
The flat ends are what make one band cover three families. They are cut straight across rather than moulded to a single case, so the band meets straight lug shoulders cleanly and seats on the Avenger, Superocean and Navitimer references it is cut for. The trade-off is worth saying out loud: on a case with a pronounced curve at the lugs, a straight end leaves a slim shadow line where band meets case. A moulded end closes that line but fits only one reference, which is why so many people spend weeks comparing a watch strap online and still order the wrong one. Look at your case side-on before you decide.
It suits three kinds of owner: the one whose original rubber has gone stiff and shiny, the one who wants to take a steel bracelet off for the summer without losing the look, and the one who simply wants the watch to read differently for a season. A traditional snap buckle is included, in silver-tone or black depending on the colour you pick, so the band is ready to wear as it arrives.
Material & Finish
FKM — fluoroelastomer — is the reason this band is worth replacing rather than living with a strap that has seen better days. It is a dense, high-fluorine synthetic rubber developed for seals that have to survive heat, oil and weather, and on a wrist that translates into three things: it does not yellow in the sun, it does not go tacky after a summer of sweat, and it does not soak up the smell of a gym bag the way softer rubber does. The surface is the other half of the story. Run a thumb along the outside and you feel a light embossed stripe down the centre with textured edges — the detail that lets a replacement band pass for the original at arm's length, rather than looking like an accessory bolted on. The inside is left smooth, so the band glides against the skin instead of dragging when your wrist changes size through the day. Water does not affect it. Swim, shower or rinse it and dry it on a towel; after salt water or a chlorinated pool, a quick rinse in fresh water keeps the buckle bright rather than the rubber. Colour is the one thing a screen cannot promise.
- FKM, not silicone — fluoroelastomer resists heat, UV, sweat and everyday oils, so it does not yellow, harden or turn tacky the way silicone and aged original resin do.
- Non-stick surface — dust, lint and towel fibres slide off rather than cling, so the matte finish survives daily wear without being scrubbed.
- A tapered cut — wider at the lugs, narrower at the buckle, which keeps the band slim under the wrist instead of flaring out at the clasp.
- Light on the wrist — thin, flexible rubber that disappears under a cuff and never tugs at arm hair the way a steel bracelet does.
- Supplied with spring bars — stainless steel bars in the box, so a spring bar tool is the only extra you might want for fitting.
- Seven colourways, two buckle finishes — each shade comes with a silver-tone or black pin buckle.
- Built to the Breitling cut — these are custom fluororubber material watch straps shaped around Avenger, Superocean and Navitimer lugs, not a universal rubber band trimmed to fit.
Lug Width & Fit Check
- Measure at the lugs, not the buckle — the number that matters is the gap between the two lugs where the band meets the case. A ruler held across it in millimetres is enough, and it takes ten seconds.
- Choose by measurement, not by collection name — two lug widths are offered because Breitling references differ; order the figure your watch actually reads, even if the model name suggests otherwise.
- Wrist check — if your current strap already fastens on its last hole, measure your wrist and tell us the number before ordering; we will say whether this cut leaves you enough tail.
- Flat ends need a straight lug shoulder — look at the case side-on. A straight lug edge gives a flush joint; a sharply curved edge will show a thin line where the band meets the case.
- Ask before you order — send the reference from the caseback and a photograph of the lug area, and we will confirm which custom fluororubber material watch strap your watch takes.
Fitting Steps
- Check the width before anything else — the most common mistake when you buy a watch strap online is ordering the buckle width instead of the lug width; the wider end is the one that goes against the watch.
- Take the old band off — press one end of the spring bar in with a spring bar tool or a thin blunt pin, then lift the band away. Work over a table so the bar does not disappear.
- Check the bars — reuse the original spring bars if they are straight and move freely; otherwise fit the stainless bars supplied with the band. If your bars have quick-release tabs, pull the tab instead of using a tool.
- Seat the new band — hook one bar end into the lug hole, compress the other side and drop it into place, then pull up firmly on the band to confirm both ends are seated.
- Set the length — thread the tail through the buckle and the keeper loops, and pick the hole that leaves the watch sitting flat on the wrist rather than sliding around.
- Check again after the first day — if you feel a click you did not hear at the start, one bar end is not fully home; press it in before the watch goes back on.
- Keep the old band — it takes no space in a drawer and gives you a spare if the watch is ever sold.
Specifications
| Product name | BNL-FJ17 |
| Material | Fluorine rubber (FKM) |
| Lug-end width | 22 mm or 20 mm |
| Buckle-end width | 20 mm |
| Total length | 125 mm + 75 mm |
| Thickness | 3.2 mm |
| Weight | 30 g |
| Buckle type | Traditional snap fastener (pin buckle) |
| Buckle finish | Silver-tone or black |
| End style | Flat-mouth, straight cut |
| Colours | Seven shades, from black to red |
| Spring bars | Stainless steel, included |
| Fits | Breitling Avenger, Superocean and Navitimer references with 22 mm lugs |
Colours & Buckle Options
| Colour | Buckle and character |
| Black | Silver-tone or black buckle; the everyday choice, at home on black, grey and white dials |
| Blue | Silver-tone or black buckle; a deep blue that reads close to black indoors |
| Dark green | Silver-tone or black buckle; the quietest shade, good with a green dial or a bare steel case |
| Light blue | Silver-tone or black buckle; the summer option, strongest against a black dial |
| Yellow | Silver-tone or black buckle; the boldest shade on the product |
| Orange | Silver-tone or black buckle; a classic sport pairing for black or blue dials |
| Red | Silver-tone or black buckle; high contrast, pairs especially well with a dark dial |
Ordering & Delivery
- Choose the lug width first — it is the one field people get wrong when they order a watch strap online, and it decides whether the band fits at all.
- Then the colour and buckle — seven shades, each supplied with either a silver-tone or a black pin buckle.
- What arrives — one two-piece band with its buckle. The watches in the photographs are for display only and are not part of the order.
- Colour matching — if the shade has to sit next to a specific dial, ask for a photograph of the real band before you buy.
- Shops, workshops and larger orders — we produce custom fluororubber material watch straps for retailers and brands; tell us the colour set, widths and quantity you need and we will come back with what is possible, the production time and the terms.
- Shipping and import charges — transit time, shipping method and any duties depend on where you are, so confirm them with our team before checkout if the date matters.
- If the size is wrong — leave the band unworn and contact us; an unused band in its original condition is the simplest to exchange, and our team will confirm the terms that apply to your order.
Warranty & After-Sales
Every order is checked before it leaves us, and our support does not stop at delivery. Email our after-sales team and a named contact replies with clear next steps. If an item arrives damaged, faulty or different from what you ordered, we arrange a replacement or the right parts. Need help fitting or using your purchase? We will walk you through it remotely, step by step, and keep replacement parts available afterwards. FUERMAN has served customers worldwide since 2010 with a team of 60+, and we stay reachable long after the order.
FAQ
Will this band fit my Avenger, Superocean or Navitimer?
It fits references in all three families — Avenger, Superocean and Navitimer — provided the gap between the lugs matches the width you order, which is why the same band is listed across the collections. Measure that gap before you buy and choose the version that reads the same. The ends are cut flat rather than moulded to one case, so the band meets a straight lug shoulder cleanly and can show a slim line on a strongly curved case. Send us the reference from the caseback and a photo of the lugs, and we will confirm which custom fluororubber material watch strap your watch takes.
Is this real FKM rubber or ordinary silicone?
FKM fluoroelastomer, not silicone. You can feel the difference: FKM is denser and stays matte, while silicone feels softer and starts grabbing dust within days. FKM also resists heat, UV and sweat without yellowing or turning tacky, which is usually why an original resin or silicone strap ends up in a drawer. A fluororubber material watch strap also rinses clean and dries without holding odour.
Can I keep my original Breitling buckle?
The band arrives with its own traditional pin buckle in silver-tone or black, so you can wear it straight away. If you would rather keep your Breitling buckle, the buckle end of the band is the narrower of the two ends — check that your buckle matches that width and it will swap straight over. If you run a folding clasp, compare the clasp fitting with the band before you change anything.
How do I clean it, and will it stay looking new?
Warm water and a drop of mild soap, worked in with your fingers, then rinsed and dried on a towel. Rinse after the sea or a chlorinated pool so the buckle stays bright, and wipe sunscreen off rather than leaving it on the surface. Keep the watch on a stand or laid flat instead of folded into a drawer, and the band holds its shape and its matte look.
Are other colours or widths available?
The band comes in seven shades, in both lug widths, each with a silver-tone or black buckle. If the shade you want is not shown, we produce custom fluororubber material watch straps in other colours and finishes — tell us what you are matching and we will confirm what can be done.