Product Overview
Some wrists simply do not get along with a standard strap. The Seiko 5 Sports Red Fang is a big, bright dive watch, and the rubber it ships on is cut for an average wrist — which is why the tail often stops short of the keeper and the buckle ends up sitting off to one side. It is a straight replacement, not a modification. Four colourways cover the usual ground — black for everyday, dark blue and army green for something quieter, and orange when you want the watch to look like the tool it is; custom fluororubber material watch straps can be made to your own shade if none of the four is right. Each one comes with a colour-matched keeper, in soft silicone or brushed metal, and a buckle finished in the same tone. It is built for people who actually wear their watch: a bike commute, a workshop bench, the gym, a hot car park. The strap should look the same after all of that, and come off the wrist at the end of the day without a smell or a sticky feel.
Steel Blade, Buckle & Build
- It does not make the strap rigid; it stops it growing. Rubber straps usually fail by stretching — the holes ovalise, you punch a new one, and the strap starts to look tired. The blade keeps the hole spacing where it started.
- Why that matters at the buckle. A stretched strap lets the watch head rotate off-centre and slide around the wrist. With the blade in place, the buckle stays where you set it through a full day of wear.
- Two keeper options. A soft silicone keeper is the quieter choice and will not rattle against a desk; the brushed steel keeper in the matching tone gives a harder, more tool-like finish.
- A gentle pre-curve. The strap is moulded with a curve instead of coming out of the pack dead flat, so it wraps the wrist from the first wear rather than standing away at the lugs.
Fluororubber Material
FKM — fluororubber, sometimes written fluoroelastomer — is the rubber used where ordinary silicone is not quite enough. Fluorine atoms are built into the polymer chain, and that is what lets the material shrug off heat, sweat, sunscreen, oils and UV instead of slowly reacting to them. The practical test is a summer commute: on a silicone band you notice the strap, on a fluororubber material watch strap you stop thinking about it.
It stays dry. Silicone can feel tacky after an hour in warm weather; FKM keeps a matte, dry touch, so the watch does not stick to your arm when you move.
It does not hold odour. Sweat sits on the surface and rinses away. Mild soap, a rinse and a wipe are enough to bring it back.
It keeps its colour. The compound resists the yellowing that makes a pale silicone band look tired after a season, and the darker shades hold their depth instead of going chalky.
It has presence. This is a substantial strap for a substantial watch — it does not flutter or twist on the wrist, and it keeps its shape when you set it down.
The underside breathes. A shallow ribbed channel runs along the inner face, giving air and moisture somewhere to go instead of trapping them flat against the skin.
It is quiet in the heat. No squeak against a desk edge, no tacky grip on an arm rest — the sort of thing you only notice once it is gone.
Sizing & Wrist Fit
- Measure the lug gap, not the old strap. The number you need is the distance between the inside faces of the two lugs, taken straight across the case. A ruler is enough; a caliper is better.
- Read what your current strap is doing. If you are already on the last hole, if the tail pulls out of the keeper when you reach into a pocket, or if the buckle sits off-centre under your wrist, the extra length is the part you are missing.
- What 130 + 80 mm gives you. The long side carries the extra length, because that is the part that has to travel around a wider wrist; the buckle side keeps normal proportions so it still folds neatly into the keeper.
- If your wrist is slim. A long strap leaves a tail past the keeper. That is a look, not a fault — wear it on a higher hole and tuck the tail under the keeper rather than cutting it, since a cut end will fray and cannot be undone.
- Two widths, no middle size. There is no 21 mm version, so do not round up or down between the two. If your case measures somewhere in between, send us the measurement before choosing — a custom fluororubber material watch strap may be a better answer than guessing between the two.
- Write the number down before you order a watch strap online. 20 mm and 22 mm are only 2 mm apart on a ruler, which is precisely why guessing goes wrong and why the measurement is worth two minutes of your time.
Installation & First Fit
- Work over a cloth. Take the watch off and lay it face down on a folded towel, so a spring bar that slips out of your fingers does not bounce off a hard floor.
- Release the old strap. Compress one spring bar with a spring bar tool and lift that end out of the lug, then repeat on the other side. Keep the old bars in a drawer — they are a useful spare.
- Seat the new strap. Hook one spring bar into a lug hole, compress the other end and let it click into the opposite lug. Tug both ends firmly afterwards; a bar that is only half seated will pop out the first time you pull on the strap.
- Set the length properly. Thread the tail through the keeper and pick the hole that holds the watch flat against the wrist without pinching. Two fingers should slide under the strap, not three.
- Give it a day before judging the fit. The compound softens with body heat and takes the shape of your wrist within a few hours. If it still feels tight after that, move one hole rather than forcing it closed.
Maintenance & Care
A dive watch gets worn hard, and the strap takes most of it. Fluororubber is forgiving, but a few habits are the difference between a band that still looks new after two summers and one that goes shiny, chalky and slightly sour.
Rinse it before it looks dirty. Sweat, sea salt and sunscreen all sit on the surface rather than soaking in, so they come off easily — but only if you wash them off. Hold the strap under running fresh water, work a drop of mild hand soap along the inner channel with your fingertip, and use a soft toothbrush around the buckle and keeper where grit collects. Pat it with a towel and let it air dry completely before it goes back on the wrist.
Keep solvents away from the surface. Sunscreen, insect repellent, perfume, hair oil and hand sanitiser are the usual culprits: wipe them off promptly rather than letting them sit. Acetone, nail polish remover and solvent-based cleaners will dull the matte finish permanently, and an abrasive polish or scouring pad leaves shiny patches that cannot be blended back in. Warm soapy water is the only cleaner this strap needs.
Dry it out of the bathroom. A strap that stays damp in a closed drawer or a steamy bathroom never quite dries, and that is where smells start. After swimming or a workout, let it hang or lie flat in moving air until it is dry to the touch, then store it loosely coiled in the curve it already has — not folded sharply, and not pressed under a watch box lid. Long spells of direct sun are worth avoiding too, not because the colour will fade but because nothing rubbery enjoys being baked.
Look after the metal as well as the rubber. The brushed steel buckle will pick up fine scratches in normal use — that is the finish doing its job, and it blends in rather than standing out. The keeper is the part that wears first, and it is a simple swap when it finally softens. Check the spring bars every few months by tugging each end of the strap; they are the cheapest component on the watch and the one that lets go first, so replace them at the slightest sign of bending.
Leave the tail alone. If you wear the strap on a smaller wrist, tuck the surplus tail under the keeper instead of trimming it. A cut end cannot be sealed neatly at home, and it will fray and look unfinished within weeks.
What a well-kept strap looks like a year in. Holes still round, no chalky film on the surface, no smell when you take it off, and holes that still line up with the ones you started on. On a fluororubber material watch strap that is a realistic result from five minutes of care every few weeks — and it is the reason the strap outlasts the watch's next service interval.
Specifications
| Detail | Specification |
| Model | SEI-FJ31 |
| Material | Fluorine rubber (FKM) |
| Lug width | 20 mm / 22 mm |
| Length | 130 mm long side + 80 mm short side |
| Thickness | 3.4 mm |
| Weight | 37 g |
| Buckle | Brushed stainless steel pin buckle |
| Strap ends | Flat |
| Reinforcement | 0.1 mm memory steel blade |
| Colours | Black, dark blue, army green, orange |
| Keeper | Silicone or metal, colour-matched |
| Fits | Seiko 5 Sports Red Fang SRP601J1, SRPB53, SRP599J1 |
| Spring bars | Pair included |
Ordering & Delivery
- Confirm the three choices. Width (20 mm or 22 mm), colour, and keeper type — silicone or metal. Those three selections are the whole order, so they are worth checking twice before it goes through.
- Send the watch model if you are unsure. A photo of the case between the lugs is even better. We check it against the fit list before the strap is packed, which is far quicker than sorting out a return afterwards.
- Ask about dispatch and shipping before you pay. Timing, carrier and cost depend on your destination and parcel size, so we confirm them with you at the time of ordering rather than quoting a figure that may have moved.
- Plan for import charges. Anything your customs office charges on arrival is set locally and sits outside the price of the strap itself.
- Trade, teams and own-brand orders. Ask about custom fluororubber material watch straps if you need several widths, your own colour or a logo — we will confirm what is possible before you commit to anything.
- If neither width is right. Tell us the measurement you have. If it needs a custom fluororubber material watch strap, that is a conversation to have before ordering rather than after.
Warranty & After-Sales
Every order is checked before it leaves us, and our support does not stop at delivery. Email our after-sales team and a named contact replies with clear next steps. If an item arrives damaged, faulty or different from what you ordered, we arrange a replacement or the right parts. Need help fitting or using your purchase? We will walk you through it remotely, step by step, and keep replacement parts available afterwards. FUERMAN has served customers worldwide since 2010 with a team of 60+, and we stay reachable long after the order.
FAQ
Will it fit my Seiko 5 Red Fang?
That comes down to one measurement. This fluororubber material watch strap is made in 20 mm and 22 mm, and it is listed for the Seiko 5 Sports Red Fang references SRP601J1, SRPB53 and SRP599J1. Measure the gap between the lugs on your own case — straight across, not around the old strap — and match it to one of those two widths. If your case measures 18 mm, get in touch before ordering rather than forcing a wider strap into the lugs.
My wrist is on the large side. Will the extended length actually help?
That is exactly what it is for. The long side is 130 mm against 80 mm on the buckle side, which gives roughly 210 mm of strap — noticeably more tail than a standard dive strap, so the buckle can sit centred under the wrist. If your current strap only fastens on the last hole, or the tail pulls out of the keeper when you put your hand in a pocket, this is the version to take. Reading the length carefully before you order a watch strap online is worth more than judging from the photos.
Can I have a different colour, or my own logo?
Black, dark blue, army green and orange are the standard shades, each with a silicone or metal keeper and a colour-matched buckle. Other colours and logos are handled as a made-to-order conversation: describe the shade, the logo and how many you need, and ask about a custom fluororubber material watch strap. We will confirm what can be done and what the run involves before anything goes into production.
Do you make this strap for other watches?
This one is cut and listed for the Seiko 5 Sports Red Fang cases above. The same fluororubber build appears on straps for other models, and if you want it for a watch that is not on the list, ask about custom fluororubber material watch straps — width and buckle type are the two things we would need to match to your case.
How close are the colours to the photos?
Close, but screens are not colour-calibrated. The orange is a strong, saturated orange rather than a rust tone, the army green is muted and olive-leaning, the dark blue reads as navy in daylight, and the black is a plain matte black. If the exact shade matters to you, ask for a daylight photo before ordering a watch strap online — that is quicker than returning one.
Can I swim or train in it?
Sweat, rain and a rinse under the tap do nothing to FKM, and the strap dries quickly afterwards. Whether the watch itself can go in the pool is a question about the case, its seals and when it was last serviced, not about the strap. After salt water, rinse the strap in fresh water and let it dry fully before it goes back in a drawer.