Product Overview
The TAG Heuer Formula 1 chronograph is a big, bright watch, and the steel bracelet is the heaviest thing on it. This 22/20 mm FKM rubber band is the swap: 22 mm at the lugs for the 43–44 mm case, tapering to 20 mm at the buckle end so your original TAG Heuer folding clasp — the one with the security pushers and the diving extension — goes straight back on. Nothing about the watch changes. Only the weight and the look do.
It is a custom fluororubber material watch strap shaped to this case rather than a generic band trimmed to fit, so the flat ends sit square against the lugs and the taper follows the case line instead of fighting it.
The rubber is FKM, a fluoroelastomer: dense, matte and slow to change. Where silicone turns shiny and grippy after a summer, this stays matte and lets dust slide off. At 3.9 mm thick and 30 g, it keeps some of the visual presence of the bracelet without the swing weight on your wrist.
Seven colours are offered, from black and grey through blue, green and red to orange and starlight, with silver-tone, gold-tone or black hardware depending on the version.
Worth saying plainly: this is a compatible replacement band made by FUERMAN, not an official TAG Heuer part. It is here for owners who want the chronograph on rubber for summer and sport, or whose bracelet is scratched and a dealer replacement is hard to justify.
Material & Build
Why FKM instead of silicone. Silicone is soft and lower-cost, and it shows its age: a pale film, a sticky surface that collects lint, a faint smell after a workout. FKM fluororubber is denser and more chemically stubborn. Dust slides off rather than clinging, sun and heat do not dull the surface, and the rubber resists sweat, salt and the oils on your skin without going tacky.
Surface and finish. The face is matte with a light perforated texture that echoes the racing look of the Formula 1 line without turning the watch into a toy. Edges are finished cleanly and the ends are cut flat and square, which is what lets them sit tight against the case.
Feel and thickness. At 3.9 mm the band has enough body to balance a 43–44 mm chronograph — a very thin rubber strap on a heavy watch looks wrong — yet it is still supple enough to wrap the wrist rather than stand off it. New, it feels firm; worn for a week, it softens where it bends.
Hardware. The 20 mm buckle end is finished so the original TAG Heuer clasp closes flush, and where a buckled version is supplied the hardware is fine steel in a polished silver or gold tone.
How it ages. A custom fluororubber material watch strap does not crack along the buckle folds or yellow where the sun hits it, so it ages by looking slightly less new rather than looking worn out.
Fit & Reference Check
- Order by reference. The band is built for the Formula 1 chronograph case, and the references that share its 22 mm lug width include CAZ1010.BA0842, the steel-bracelet model, and CAZ1010.FT8024, the rubber version. If the case back shows a different reference, the lug measurement decides it, not the series name.
- Measure inside the lugs. With the old strap off, measure from one lug inner face to the other. It should read 22 mm. This is one of a run of custom fluororubber material watch straps built to a specific case, so that number comes before anything else.
- Before you buy a watch strap online, check the buckle end. This one is 20 mm at the clasp — the width that takes the original TAG Heuer folding clasp, so no new clasp is needed.
Fitting Steps
- Take the bracelet off: compress the spring bar at the lug with a spring bar tool and free one end, then the other.
- Keep the clasp: the TAG Heuer folding clasp comes off the old bracelet and transfers to the 20 mm end of this fluororubber material watch strap — no new clasp and no adapter.
- Fit the spring bars: slide the supplied stainless steel bars into the strap ends, one on the long section and one on the short.
- Seat the lug end: angle the 22 mm end into the case, compress one spring bar, drop it into the lug hole, then do the same on the other side.
- Check the flat mouth: the ends should sit square to the case with no gap or overhang running along the lug line.
- Set the length: close the clasp and check where the pin lands; if you sit between two holes, the clasp's own adjustment is the next thing to try.
- Bag the bracelet: keep the steel bracelet and its spring bars together so the watch can go back to it for formal wear.
Care & Storage
- Wipe the matte face with a damp cloth when it looks dusty; the texture releases lint instead of trapping it.
- Keep sunscreen, insect repellent and solvent-based cleaners off the rubber — they leave dull patches a cloth will not lift.
- Dry the strap with a cloth before the watch goes back in its box, particularly after a hot day out.
- Store it flat or loosely coiled; a sharp fold left under a heavy watch box can leave a crease that takes a while to relax.
- Rotate it: bracelet for formal days, rubber for summer, sport and travel, so neither part takes all the wear.
- Check the spring bars once a season and replace one that is bent or sits loose in the lug hole.
- Nothing on a fluororubber material watch strap needs feeding, oiling or conditioning — unlike leather, it has no finish to maintain, only a surface to wipe.
Specifications
| Product code | 7818 |
| Material | FKM fluororubber (fluoroelastomer) |
| Lug end width | 22 mm |
| Buckle end width | 20 mm |
| Length | 125 mm + 75 mm |
| Thickness | 3.9 mm |
| Weight | 30 g |
| Connector | Flat mouth (flat snap opening) |
| Clasp | Fits the original TAG Heuer folding clasp |
| Spring bars | Stainless steel, supplied |
| Colours | Black, blue, green, grey, starlight, red, orange |
| Hardware | Polished silver or gold tone |
| Water | Waterproof for swimming and daily wear |
Colours & Hardware
| Colour | Hardware options |
| Black | Silver-tone, gold-tone or black |
| Blue | Silver-tone or gold-tone |
| Green | Silver-tone or gold-tone |
| Grey | Silver-tone or black |
| Starlight | Silver-tone or gold-tone |
| Red | Silver-tone or black |
| Orange | Silver-tone, gold-tone or black |
| Strap face | Matte with a light perforated texture |
| Hardware | Fine steel, polished silver or gold tone |
Ordering & Delivery
- What arrives. One strap in two sections, 125 mm and 75 mm, with stainless steel spring bars. The watch, the steel bracelet and the TAG Heuer clasp shown in the photos are not included.
- Choose the version. Colour and hardware tone are picked from the variant menu; if the combination you want is not listed, ask before you pay rather than after.
- Clasp or buckle. The 20 mm end is built for the original TAG Heuer folding clasp. If you would rather have the strap with its own pin buckle, tell us your reference and we will confirm what is available.
- Ordering a watch strap online is quick, but the fit check comes first: reference, then lug width, then colour.
- Payment and delivery. Payment methods, shipping cost and estimated delivery time are shown at checkout for your country; if you need the timing before you commit, ask and we will check.
- If the fit is wrong. Send it back unused with the spring bars and tell us the reference; we will sort out the right width or colour with you.
- Trade and repair desks. Shops can ask for a stock list of our custom fluororubber material watch straps across the TAG Heuer references we cover, along with trade terms.
Warranty & After-Sales
Every order is checked before it leaves us, and our support does not stop at delivery. Email our after-sales team and a named contact replies with clear next steps. If an item arrives damaged, faulty or different from what you ordered, we arrange a replacement or the right parts. Need help fitting or using your purchase? We will walk you through it remotely, step by step, and keep replacement parts available afterwards. FUERMAN has served customers worldwide since 2010 with a team of 60+, and we stay reachable long after the order.
FAQ
Can I swim and shower with the strap on?
Yes. The rubber is waterproof, so swimming, showering and a sweaty training session are all fine. Chlorine and salt are the two things worth a routine: after a pool or the sea, rinse the strap in fresh water and let it dry before the watch goes away. Because a fluororubber material watch strap does not absorb water the way leather or fabric does, it will not sit damp against your wrist or hold an odour.
Will the colour match what I see on my screen?
Phones and monitors push colour, and a matte surface reads a shade darker indoors than it does in daylight. Black and grey are the safest matches for a steel case; blue and green come closest to the dial in daylight; orange, red and starlight are the loud ones and suit the black dial especially well. The hardware tone changes the look as much as the strap colour, so choose the pairing you will actually wear rather than the one that photographs well.
Is it stiff when new?
Slightly, and deliberately so. A new custom fluororubber material watch strap keeps the curve it was moulded with and feels firm at the buckle end for the first few days; body heat and normal wear soften it where it bends around the wrist. There is no break-in routine — no oil, no stretching — and it will not go floppy the way an inexpensive silicone band does.
What if I am not sure my lugs are 22 mm?
Take the old strap off and measure between the lugs, inside face to inside face, with a metal ruler rather than a tape. 22 mm is this case; 20 mm is the buckle end, not the lug width — that is the number people mix up. If your measurement lands between two marks, send a photo of the ruler across the lugs before you order a watch strap online and we will tell you which width the case takes.
Do you make this band for other Formula 1 references?
This mould follows this chronograph case, and other Formula 1 references use different lug widths and end shapes, so the reference on the case back is the first thing we check. Beyond this model, custom fluororubber material watch straps are made for a wide spread of TAG Heuer references and other brands — send the case number and a lug measurement and we will confirm what exists and what has to be built.
Will the matte finish mark easily?
The texture hides the small stuff better than a smooth polished rubber would — desk scuffs, fingerprints, the dull patch where a clasp rubs. Real marks come from edges rather than the face, usually from catching the buckle end on a desk. If the surface does pick up a light scuff, a damp cloth and gentle rubbing with a fingertip usually lifts it; if it does not, send us a photo and we will advise.