Home > All Products > Material Classification > Fluororubber Material > 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
1/1
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap

20mm/22mm Curved End Quick Release FKM Rubber Watch Band

SKU:
Product Name: 7825
Material: Fluorine rubber
Clasp: Traditional hook and loop fastener
Width: 20/21/22mm
Length: 120 + 75mm
Thickness: 3mm
Weight: 27g
Optional colors: Black/Orange/Army Green/Blue Sapphire/Grey
Portable quick-release interface
The product color may vary from the picture due to the display differences of computers/mobile phones.
0.0 (0 Reviews)
0 Sold
$47.76 $23.88
Received successfully
Coupon Code
CONTINUE SHOPPING
    Please select the information you want X
  • Size:
    20mm
    21mm
    22mm
  • Color:
    Royal Blue - Silver
    Royal Blue - Silver
    Royal Blue - Black
    Royal Blue - Black
    Orange - Silver
    Orange - Silver
    Orange - Black
    Orange - Black
    Black - Silver
    Black - Silver
    Black - Black
    Black - Black
    Gray - Silver
    Gray - Silver
    Gray - Black
    Gray - Black
    Army Green - Silver
    Army Green - Silver
    Army Green - Black
    Army Green - Black
    Please select the information you wantX
Quantity:
-
+
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
1/1
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • 20mm/22mm Curved End Quick Release FKM Rubber Watch Band,FUERMAN,Curved end FKM 20/22 mm - fluororubber material watch strap
  • Description

Product Overview

A curved end, quick-release spring bars and a fluororubber build — this is the band you fit when the original rubber on a daily watch has gone shiny, stiff or tacky. It is moulded in FKM fluororubber at 20 mm, 21 mm and 22 mm lug widths, with a taper that narrows from the lugs toward the buckle so the profile follows the wrist instead of staying slab-wide. That ribbed, ventilated surface is what makes this fluororubber material watch strap comfortable through a hot commute, a gym session or a long day outdoors. As a curved end quick release watch band it meets a round case instead of stopping short of it, which is exactly where a flat-ended strap gives itself away with a gap you can see from across a table. Order this watch strap online in the width and finish that match your case, or send us a photo of the lugs first if you would rather have the fit checked before you commit.

Fluororubber watch straps in several colors with a wristwatch.20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band20mm/22mm Curved End Quick Release FKM Rubber Watch Band

Material & Build

FKM — fluoroelastomer — is why this band behaves nothing like a basic silicone strap. The material is denser, it holds its shape, and it stands up to heat, ultraviolet light, sweat and the everyday chemicals that leave ordinary rubber tacky and discoloured. It shrugs off temperature swings as well, so a strap left on a dashboard in summer or worn on a cold morning will not harden or take a set, and it resists the slow yellowing that makes silicone look tired after a season.

The surface is matte with fine ribbing moulded across it, and the texture does real work: it hides the scuffs and fingerprints a smooth band collects within a week, wipes clean instead of absorbing whatever it touches, and leaves no smell behind after a workout.

At 3 mm thick there is enough body for the band to keep its line on the wrist without turning into a piece of hose, and the width tapers toward the buckle so the fastening end does not bunch. The pin buckle comes in a silver-tone or black-tone finish, with keeper loops to hold the tail flat against the strap.

Because the ribbing, the taper and the curved ends are moulded into the strap rather than cut or glued on afterwards, there are no joins to lift at the lugs — which is the practical difference between this custom fluororubber material watch strap and a silicone one.

Curved-End Fit & Case Profile

A flat-ended strap on a round case leaves a step at each lug — a small gap that reads as non-original from a short distance. The ends on this band are moulded with a curve that follows the case contour, so the rubber meets the case rather than stopping short of it, and the line from dial to wrist stays unbroken. The curve is fixed rather than flexible. That is the point — a moulded curve is what keeps the ends tight against the case — but it also means the lug width has to be right. One millimetre out and one end will sit proud while the other presses in, so measure rather than assume. Round cases with conventional lugs are the natural match. A very square case, a slab-sided case, or one whose lugs sit unusually low or high can fight the moulded curve, and that is worth checking before ordering: send a profile photo of the watch with a ruler across the lugs and we will tell you honestly whether the ends will sit flat. The side profile matters as much as the case diameter. A case that curves away steeply behind the lugs needs the ends to follow it, while a shallow case can take a gentler curve without a gap opening underneath. The curve also carries the taper: the band leaves the case at full width and narrows toward the buckle, so the silhouette reads as one continuous line rather than a wide slab pinched at the end.

Sizing & Lug Width

  • Measure the gap, not the case — the number you need is the distance between the inside faces of the two lugs, in millimetres. Case diameter tells you nothing about strap width.
  • 20 mm — the most common sports-watch width, and the size most 38 to 40 mm everyday watches take.
  • 21 mm — the in-between size people round up or down by mistake, then wonder why the band sits off-centre. Measure it, do not round it.
  • 22 mm — usual on larger divers and chronographs, where the case has the weight to carry a wider strap.
  • Read the old strap first — most original straps have the width moulded or stamped into the underside near the spring bar, which is faster and more accurate than a ruler.
  • Watches that commonly use these widths — Omega, Seiko, Tissot, Breitling, Rolex, Tudor and Mido all build models on 20, 21 or 22 mm lugs. The width decides the fit, not the badge on the dial.
  • Length and wrist size — the band comes as two pieces with a long run of holes on the tail, so the buckle can sit where you want it instead of at a fixed point.
  • No trimming to fit — the curved ends on these custom fluororubber material watch straps are moulded to size, so a band that is a millimetre out will not flex into place. If your measurement lands between two sizes, send us the number and a photo and we will confirm which to take.

Quick Release Installation

  1. Lay the watch face down on a soft cloth with the lugs toward you, so nothing can scratch the crystal while you work.
  2. If the old strap has quick-release tabs, pull the tab and lift that end out of the lug. If it uses a plain spring bar, a spring bar tool makes the job easier and keeps the case safe.
  3. Slide the old strap free of the lugs and set it aside.
  4. Hook one end of this curved end quick release watch band into a lug hole with the moulded curve facing the case, so it sits the right way round.
  5. Compress the quick-release tab on the other end, ease the spring bar between the lugs and let it snap into the hole — you should feel it click home.
  6. Tug the band gently away from the case to confirm both ends are seated, then repeat the same sequence on the other side of the watch.
  7. Thread the tail through the buckle and the keeper loop, then fasten it on the hole that keeps the watch head centred on your wrist.

Breathability & Comfort

  • Channels under the ribbing — air moves along the strap instead of sitting trapped between rubber and skin, so moisture escapes rather than pooling under the watch.
  • A ribbed top surface — the raised lines break up continuous contact with the wrist, which is what stops the clammy, stuck-down feeling a smooth rubber band develops on a hot afternoon.
  • Substantial but not heavy — there is enough material for the band to feel solid in the hand, yet it does not drag the watch head round when you turn your wrist.
  • Tapered toward the buckle — less material crowds the underside of the wrist where the strap closes, so the fit stays neat under a shirt cuff.
  • Soft along its length — the band flexes with the wrist rather than standing away from it, and it settles against the arm within a day or two of wear.
  • Nothing to soak it up — with no fabric lining to hold sweat, the surface simply wipes clean and goes back on dry.
  • Holes along the tail — set the buckle so the watch head sits centred on top of the wrist instead of sliding toward the outside edge.
  • Where it earns its keep — a summer commute, the gym, cycling, poolside, or a humid trip where a leather strap would give up by day two.

Use & Care

Fluororubber is easy to live with. After a sea swim or a session that leaves the strap damp with sweat, rinse it under fresh water and dry it with a soft cloth — salt and sweat are the two things that shorten the life of any rubber band. Wipe off sunscreen, moisturiser and chlorine the same way, and keep solvents, oils and alcohol-based cleaners away from it, because those attack the surface rather than clean it.

Store the band flat or loosely coiled in a watch box so the moulded curve stays true; folded under a pile of straps for months, it can take a crease at the lug ends that no amount of wear will fully press out.

Water is not a problem for the band itself — swimming, rain and a rinse at the tap are all fine — but how deep the watch can go is set by the case, not the strap. Keep treating a dress watch with the same care you always would, and save the diving for a watch rated for it.

Fasten it on the hole that keeps the watch head centred rather than pulling it tight; a band worn too snug traps moisture underneath and stretches the holes faster. If you wear the watch daily, a second strap in rotation gives each one a chance to dry out properly.

One habit worth keeping: after the band has been in salt water, rinse it before it dries, not the next morning. Dried salt works its way into the ribbing and dulls the finish. The fluororubber material watch strap will shrug off an occasional missed rinse, but a routine keeps it looking new for far longer.

Specifications

SpecificationDetail
Product name7825
MaterialFluorine rubber (FKM)
Lug width20 mm, 21 mm, 22 mm
Length120 mm + 75 mm (two pieces)
Thickness3 mm
Weight27 g
End shapeCurved, moulded to follow the case
FittingBuilt-in quick-release spring bars
BuckleTraditional pin buckle, silver-tone or black-tone
ColoursBlack, Orange, Army Green, Blue Sapphire, Grey
SurfaceMatte with fine ribbing and ventilation channels
Heat rangeFlexible from -26 °C to +232 °C

Colour & Buckle Finish

  • Black — the safe pairing; it disappears against a steel or black-coated case and works with any dial.
    • Blue Sapphire — a deep, saturated blue that picks up blue dials and dive bezels without looking like an accessory.
    • Army Green — flat, muted olive that suits field watches and weekend wear.
    • Orange — the sporty option, easy to spot on a dive boat or a running track.
    • Grey — a quiet mid-tone that sits well with titanium cases and grey or silver dials.
    • Buckle finish — every colourway is offered with a silver-tone or a black-tone pin buckle, so match the case metal or set up a deliberate contrast.
    • Decide the buckle with the colour — the detail most often forgotten when ordering a watch strap online is the buckle finish; choose it at the same time as the strap colour so the two arrive matching.
    • Screen versus daylight — the matte surface reads slightly darker indoors than on a bright screen, so expect a small shift between the photo and the band in your hand.

Ordering & Confirmation

  • Confirm the width first — measured across the lug gap rather than guessed from the case size. Everything else depends on this one number.
    • Confirm the pairing — colour plus silver-tone or black-tone buckle are selected together, so decide both before you check out.
    • Single bands — order the watch strap online through the cart, where the sizes and colour pairings are listed on the product options.
    • Shop orders — retailers and online sellers can ask about custom fluororubber material watch straps in their own colour and quantity through their sales contact.
    • Unlisted colours — if you want a custom fluororubber material watch strap in a shade that is not shown here, raise it before ordering so the colour can be confirmed in writing.
    • Terms to settle with your sales contact — sample availability, production and delivery timing, payment method, packing and shipping cost are quoted per order. Ask for them before you commit so nothing is assumed on either side.
    • Check the buckle you plan to use — if you intend to keep an original pin buckle rather than the one supplied, mention it when you order so the fitting can be confirmed.

Warranty & After-Sales

Every order is checked before it leaves us, and our support does not stop at delivery. Email our after-sales team and a named contact replies with clear next steps. If an item arrives damaged, faulty or different from what you ordered, we arrange a replacement or the right parts. Need help fitting or using your purchase? We will walk you through it remotely, step by step, and keep replacement parts available afterwards. FUERMAN has served customers worldwide since 2010 with a team of 60+, and we stay reachable long after the order.

FAQ

Which width do I need — 20 mm, 21 mm or 22 mm?

Measure the gap between the inside faces of the two lugs in millimetres; that number is the strap width, and the case diameter is irrelevant to it. Most original straps also have the width stamped into the underside near the spring bar. Do not round a 21 mm measurement up or down — a moulded curved end will not flex into a lug gap it was not made for. If your measurement sits between two sizes, send us the number with a photo and we will confirm before you order.

Will the curved ends sit flush on my watch, or leave a gap?

On a round case with conventional lugs, yes — the ends are moulded to follow the case contour so the rubber meets the case instead of stopping short. The curve is fixed, which is what keeps it tight, so the lug width has to be exact. Very square or slab-sided cases, or lugs set unusually low, can fight the moulded shape. A curved end quick release watch band is only as good as that fit, so send a side-on photo with a ruler across the lugs and our support team will tell you plainly whether the ends will lie flat.

What is the real difference between FKM and ordinary silicone?

FKM is denser and far more resistant to heat, ultraviolet light, sweat and everyday chemicals. This fluororubber material watch strap keeps its suppleness in both heat and cold, so neither hardens it or leaves it with a set, and it resists the yellowing and surface tack that make silicone look worn after a season. It also wipes clean rather than absorbing what it touches, so it does not hold odour.

Will it feel hot and clammy during summer or a workout?

That is what the ventilated ribbing is for. Air moves along the channels under the surface and moisture escapes instead of pooling between the rubber and your skin, and the raised lines break up continuous contact with the wrist. There is no fabric lining to soak up sweat, so the band wipes dry and goes straight back on.

Can I fit it myself without damaging the watch?

Yes. Both ends carry built-in quick-release spring bars: hook one end into a lug hole, compress the tab on the other, ease it between the lugs and let it click home, then repeat on the far side. Lay the watch face down on a soft cloth while you work, and give the band a gentle tug to check both spring bars are seated. No spring bar tool is needed, although one helps when removing an older strap that uses a plain pin.

Can I swim or shower with the band on?

The band itself is happy in water — swimming, rain and a rinse at the tap will not damage it. How deep the watch can go is decided by the case, not the strap, so keep to the rating on your watch. After salt water or a heavy sweat, rinse the band under fresh water and dry it with a soft cloth rather than letting salt dry into the ribbing.

Can I have a colour that is not shown here?

Ask before ordering. We can look at a custom fluororubber material watch strap in a colour outside the five listed, but the shade has to be confirmed with your sales contact first so there is no surprise when it arrives. Colours also read slightly differently in daylight than on a screen, which is worth allowing for on a very specific match.

Do you produce bands with a shop's own logo?

Yes — custom fluororubber material watch straps with your own branding are arranged through your sales contact rather than through the cart, because the artwork, placement and the colour of the buckle all have to be agreed first. Send the logo file and the size and colour breakdown you need, and the details can be confirmed in writing before anything goes ahead.

Frequently Bought Together
more
Frequently Bought Together

CUSTOMER REVIEWS

0.0 0 Reviews
Write a review